Building the Walnut Side Table (Placeholder)
Placeholder post. A step-by-step build log showing how a write-up will look, linked to its project.
This is placeholder content. It exists to show the layout and will be deleted once real posts are added.
Milling
Rough lumber was jointed, planed and left to settle for a few days before final dimensioning. Skipping that rest is how tables end up rocking.
Cutting the tenons
| Part | Count | Tenon size |
|---|---|---|
| Long aprons | 2 | 3/8” × 2-1/2” |
| Short aprons | 2 | 3/8” × 2-1/2” |
| Shelf rails | 4 | 1/4” × 1” |
Finishing
Three coats of Danish oil, a day apart, then paste wax.
Coat 1: flood, wait 15 min, wipe off
Coat 2: thin, wipe off after 10 min
Coat 3: thin, buff with 0000 steel wool